top of page
Auto electrical repair on a European import at Euro & Jap Auto Repair in Murray, UT

AUTO ELECTRICAL REPAIR - MURRAY, UT

Auto Electrical Repair 

 

European & Japanese Auto Electrical Repair Serving the Salt Lake Valley

CALL TODAY TO BOOK YOUR APPOINTMENT

Warning Signs You Need Auto Electrical Repair

headlights flicker.jpg

The headlights or dash lights dim or flicker, especially at idle or when you turn on more accessories

car Battery.jpg

The battery warning light is on, or the battery keeps dying and needs frequent jump starts

car losing power auto repair services.png

The engine cranks slowly, or just clicks and will not start

door window on car.jpg

Power windows, locks, mirrors, or other accessories work intermittently or quit altogether

burning engine smells auto repair services.png

Fuses blow repeatedly, or you smell hot wiring or burning plastic

Untitled design (25).png

Warning lights on the dash flicker, reset, or come on for no clear reason

brake-repair-foot-pressing-brake-pedal 1.png

The car has been jump-started often, or sits for a few days and then goes dead

check engine auto repair services.png

The gauges, radio, or touchscreen cut out, glitch, or reboot while you are driving

WHAT WE DO

Auto Electrical Repair Services in Salt Lake City

Our shop handles auto electrical repair in Salt Lake City from the first test to the final check, whether the trouble is a dead battery, a failing alternator or starter, a hidden parasitic drain, or a wiring fault. Every job starts with a proper electrical diagnosis on your European or Japanese vehicle, done by a tech who works on imports daily, so we fix the real cause instead of throwing parts at it.

Auto Electrical Repair You Can Trust in Murray, UT
Serving Salt Lake City, Holladay, Midvale, and the surrounding valley. Honest diagnostics, fair pricing, and electrical work backed by an industry-standard warranty.

Specialty Auto Electrical Repair for European and Japanese Vehicles

Auto electrical repair is not a guess-and-replace job, and our shop in Salt Lake City is built around the wiring and electronics that make imports different. Modern European and Japanese cars run dozens of small computers (control modules) that all talk over a shared network (a CAN bus), so a single bad connection or low battery can trip warnings all over the car. Tracing the fault back to its source is what separates a real electrical fix from a parts swap.

bmw-auto-repair.jpg

European Auto Electrical

European vehicles from BMW, Mercedes-Benz, Audi, Volkswagen, Porsche, and Volvo are loaded with electronics, from adaptive lighting and keyless comfort access to many control modules that share one network (a CAN bus). They are sensitive to weak grounds, low battery voltage, and corroded connectors, and they often need factory-level software to read and clear faults. We diagnose with the maker's own tools (such as ISTA on BMW or ODIS on Volkswagen and Audi), repair the wiring or module at the source, and program what is needed so the systems work together again.

toyota-auto-repair.jpg

Japanese Auto Electrical

Japanese vehicles from Toyota, Honda, Nissan, Subaru, Mazda, Lexus, Acura, and Infiniti are known for solid electrical systems, but high mileage, heat, and age still bring failed alternators, tired starters, parasitic drains, and brittle wiring. We test the charging and starting system, hunt down parasitic draws and shorts, and repair wiring and connectors the right way, then confirm with the maker's software (such as Techstream on Toyota and Lexus or the HDS system on Honda and Acura) so the fix holds.

Technician performing electrical diagnostics on an import vehicle in Salt Lake City

Our Auto Electrical Repair Process

  1. Complete Visual Inspection: We start with a full electrical inspection and scan, checking the battery, grounds, fuses, and stored fault codes across the car's modules to see the whole picture. No guessing, and no selling you parts you do not need.

  2. Charging & Starting Test: We test the battery, alternator, and starter under load to confirm the charging and starting system is actually doing its job, so we replace what is failing and leave alone what is fine.

  3. Fault Tracing: For shorts, parasitic drains, and intermittent faults, we trace the circuit with a meter and the factory wiring diagrams back to the real source, instead of swapping parts and hoping.

  4. Repair or Replace: We replace the failed component or repair the wiring, connector, or ground with quality parts matched to your vehicle, so the fix is clean and holds up.

  5. Programming & Reset: When a module or battery is replaced, we program and register it and reset any related systems with factory-level software, so the car's electronics all recognize each other.

  6. Final Electrical Check: We retest the system, confirm the warning lights are out and the accessories all work, and road test as needed before you get the keys back.

FREQUENTLY ASKED QUESTIONS

Let's Answer Your Questions About Auto Electrical Repair

auto-electrical-02-jumper-cables-on-battery.jpg

WHERE WE DO AUTO ELECTRICAL REPAIR

AUTO ELECTRICAL REPAIR FOR SALT LAKE VALLEY & SURROUNDING AREAS

Based in Murray, Utah, our shop handles auto electrical repair for customers throughout the Salt Lake Valley. Whether you need a dead battery diagnosed in Salt Lake City, an alternator replaced in Sandy, or a parasitic drain tracked down in Holladay, we make auto electrical repair straightforward across the entire metro.

MURRAY · MIDVALE · SALT LAKE CITY · SANDY · DRAPER · COTTONWOOD HEIGHTS · HOLLADAY · MILLCREEK · SUGARHOUSE · WEST JORDAN · TAYLORSVILLE · WEST VALLEY CITY

Ready to Get Your Auto Electrical Problem Fixed Right?

Pick up the phone, our shop in Murray will talk you through your auto electrical repair and what your vehicle actually needs.

WHAT CUSTOMERS SAY

REAL REVIEWS FROM REAL CUSTOMERS

VISIT THE SHOP

FIND US IN MURRAY, UT

TRUSTED BRANDS WE WORK WITH

Snap-on-Logo.png
images (1) 1.png
bottom of page